Ceramic Filter Arab Aluminum has significant advantages in reducing the production cost of aluminum rod and ingot factories and improving the quality of molten aluminum products.
The filtration efficiency of Casting Filter is closely related to the correct installation and use.
At the same time, due to the adoption of the filtration process, the traditional necessary measures taken to reduce the generation of impurities in the smelting, furnace treatment, and casting processes cannot be ignored.
It is also necessary to prevent recontamination of clean, filtered molten aluminum.
Such as common slag and cleaning of aluminum smelting furnace and storage furnace; oven purification, etc.
On-line degassing device is particularly necessary, because it can not only reduce the hydrogen content in the melt, but also remove some non-metallic impurities.
The installation and use of Ceramic Filter Arab Aluminum generally need to pay attention to the following aspects
1. The size and number of holes of the Ceramic Filter should be selected in consideration of the flow range of the selected casting, the highest metal level during filtration, the total filtration volume, and the cleanliness of the original melt.
2. Ceramic Filter must be compatible with cff casthouse. Both are suitable for easy closing. This can prevent the metal from flowing into the casting box from the gap without filtering, and can also prevent the foam filter plate from being too light and floating in the aluminum water and failing.
3. It must be preheated before use to remove moisture and promote the initial instant filtration process. Electric heating or gas heating can be used for preheating. Under normal circumstances, it takes about 15 minutes.
4. In the normal filtering process, there is no need to discharge slag, which avoids the percussion and vibration of the filter plate. At the same time, the washing machine should be filled with liquid aluminum, so as not to worry too much about liquid aluminum.
5. Finally, clean the surrounding area and remove the filter plate after hardening.
According to the Egyptian Pyramid’s portal, November 21 (Sunday)
Nevin Gamea, Minister of Trade and Industry of Egypt, stated that the SME Development Agency is the policy agency responsible for formulating and approving and managing such projects, which account for more than 90% of the Egyptian economic structure. Work closely with institutions and civil associations to maximize the use of available funds to develop small, medium and micro enterprises.
The Minister of Trade and Industry Nevin Gamea and the Minister of International Cooperation Dr. Rania Al-Mashat were invited to participate in the meeting of the House of Representatives SME Committee led by Mohamed Kamal Marei. In his speech during the meeting, Minister Nevin Gamea emphasized that he would support SMEs and Strengthen the cooperation between the Ministry of International Cooperation and the Enterprise Development Bureau to promote the development of small, medium and micro enterprises.
Present at the meeting were Dr. Hala Abu Al-Saad, Deputy Minister of the Committee, Eng. Tarek Shash, Executive Vice President of the Small, Medium and Micro Enterprise Development Agency, and Mohamed Abdel-Malik, head of the agency’s regional branches.
Minister Nevin Gamea explained that Law No. 152 of 2020 and its implementing regulations issued in April 2021 give the Ministry a key mission to provide various comprehensive services at the government level to promote the development of small and medium-sized enterprises and increase productivity and competitiveness. , While encouraging young people to start their own businesses and create more job opportunities.
الترجمة العربية
بحسب موقع بوابة الأهرامات المصرية يوم 21 نوفمبر (الأحد).
صرحت نيفين جامع, وزيرة التجارة والصناعة المصرية, أن وكالة تنمية المشروعات الصغيرة والمتوسطة هي وكالة السياسات المسئولة عن صياغة واعتماد وإدارة مثل هذه المشروعات, والتي تمثل أكثر من 90% من الهيكل الاقتصادي المصري. الجمعيات لتعظيم استخدام الأموال المتاحة لتطوير المشاريع الصغيرة والمتوسطة والمتناهية الصغر.
وجهت الدعوة لوزيرة التجارة والصناعة نيفين جامع ووزيرة التعاون الدولي الدكتورة رانيا المشاط للمشاركة في اجتماع لجنة الشركات الصغيرة والمتوسطة بمجلس النواب برئاسة محمد كمال مرعي وفي كلمته خلال الاجتماع الوزير نيفين جامع وأكد أنه سيدعم الشركات الصغيرة والمتوسطة ويعزز التعاون بين وزارة التعاون الدولي ومكتب تنمية المشاريع لتعزيز تنمية المشاريع الصغيرة والمتوسطة ومتناهية الصغر.
حضر الاجتماع د..
وأوضحت الوزيرة نيفين جامع أن القانون رقم 152 لسنة 2020 ولائحته التنفيذية الصادرة في أبريل 2021 يمنحان الوزارة مهمة رئيسية لتقديم خدمات شاملة متنوعة على المستوى الحكومي لتعزيز تنمية المشاريع الصغيرة والمتوسطة وزيادة الإنتاجية والقدرة التنافسية.., مع تشجيع الشباب على بدء أعمالهم التجارية الخاصة وخلق المزيد من فرص العمل